Hello Guys
1.6.8 is compiled on the new Core I7 and work fine !
http://orsat1.ddns.net:9002
"ORSAT" is the nickname for " OReille Sud ATlantique " in french ! ;D
In english, " The Ear of South Atlantic " ;D ;D
Just a little bug, my SDR look as idle on the XYZ chart ....
Next job on Phantom, i will try to compile drivers for the Fobos SDR On the Core I3
Best regards and 73's
Quote from: F1NSK on Feb 02, 2026, 07:32 PMJust a little bug, my SDR look as idle on the XYZ chart ....
Just check once more your .toml file:
[websdr]
register_online=
true # If the SDR should be registered on https://sdr-list.xyz then put it to true
and check once more the other data in this section. You can paste it here, so to check it, and help with the setup.
Quote from: Emmanuel SV1BTL on Feb 02, 2026, 08:50 PMJust check once more your .toml file:
Hello Emmanuel
Config.toml was good, but not config-rx888mk2.toml :( Sorry !
Bug repaired and now all work very fine
73's
Hello Guys
1.6.9 compiled with some little revisions for my use.
Waouh ! The audio quality is fantastic 8)
Congratulations to SV2AMK & SV1BTL
73's
Excellent antenna and awesome reception dear Eric!
Hello Guys
1.7.0 compiled and work fine.
QUAM is very impressive ! ???
The sound is better with Opus codec, but opus don't work with native Win 10 customers
The server opens with no sound..
No problem with Win11 or Linux
73's
This is a browser compatibility issue with the Opus WASM decoder on older Windows 10 browsers, not the Operating system itself. You'll rather need an update of the browser. Flac will work on all cases.
Flac is forced in the version 1.7.0 to work in 16 bit and 2 channels (L&R), instead of 8 bit 1 channel (mono) in all the previous versions. The C-QUAM decoder can now work in Flac, but still lacks the quality of Opus in C-QUAM, and this happens because our versions from number 1.5.5 until now use a dedicated opus decoder. js file (opusMlDecoder.js), which can handle stereo signals in 16 bit. 16 bit in sound means much better quality than 8 bit.
Never mind Eric, leave the server to work in flac. There are not any C-QUAM Stereo AM stations in Europe. There are a few of them pirate AM stations here in Greece, transmitting from time to time. C-QUAM is most used in the USA & Japan.
Hello Emmanuel
For me and on all releases, opus codec give a better sound.
So i stick on opus.
Sorry for old Win10 users....
They can load and install VLC media player.
VLC install all codecs on the system so old Win10 run opus.
I've tried and it works.
73's
Hello Guys
V3.0.0 Bêta is online !
73's
Hello Guy's
6 months later we are on the 3.8.0 release ! :D :D
With a special mod on my side !
My Phantom can "speak" KiwiSDR....
This mod permit a FlexRadio under AetherSDR use Phantom as an remote antenna.
Amazing function for a twice panadapter or Diversity RX (2 audio channels with adjustable phase rotation)
Very good Eric. Maybe someone else is interested in adding this, so please send the fles and instruction to use, to be included in the current version.
Be quiet Emmanuel ! ;D ;D
Tests are in progess on 22.04 and 26.04. Phantom 3.8.0
The patch is no dependant vs OS.
The Smeter on Aether work now !! (hard job)
An other Flex user make test on my setup with success.
The patch create no issues with Phantom.
But i want push severe test during a week before sending files and inform AetherSDR users
73's to everybody
ok, I thought it was ready, so make what is needed.
Hello Emmanuel
Positive Beta Test !
Some improvments to make on the latency with distant IP. (Synchronisation)
Your are my Greek Antenna ! ;D ;D
Work in progress ...
73's
Good, very good. Therte is not way to test it from here, I don't use AetherSDR, I have not the proper tranceiver for this.
Glad it is working for you!
P.S. I want to inform you that your codes have passed from Claude's control, rebuild and refix, according to what AI thought it was the best implementation. All installers for all distros have been also rebuilt. At the final step, there was a demo installation to all Linux systems and recalibrations.
Check the final result and if it is good, then to push it on the repo.
Well Erc, please check once more from your side. Do you have audio???
Would it be better to participate in our Viber group so to change instant messages?
QuoteSysops can also use the Viber group of PhantomSDR+ (https://invite.viber.com/?g2=AQB1mPucebicwFaAUx1TEP9kvmfSeeQIywtE5do%2FNSvmgKS3Gyz2skTqf3dEYh%2Fh) for instant messaging.
P.S. Ok, fixed the audio level, a limiter is added too.
Too many recalibrations to make it work for everybody.
Eric, I want to thank you for the code, it is already implemented as v.3.9.0 and works now for me and Darko.
So, a second 'antenna' in Croatia. 8)
Hello Guy's !
Audio and Smeter works perfect.
But I've discover an issue on Waterfall. (bad response and some freeze when zooming on Aether)
Work in progress during this week to solve the problem.
Thank's and 73's
Quote from: F1NSK on Aug 31, 2026, 03:38 PMAudio and Smeter works perfect.
But I've discover an issue on Waterfall. (bad response and some freeze when zooming on Aether)
Work in progress during this week to solve the problem.
The maximum has already been achieved Eric. I'll post the newer version tomorrow. Work on our newer version, when it will be released.
P.S. your initial code has been modified many times, so to readjust the s-meter, frame rate, gain etc, etc, and to make it work with the installers of the other distro's too. So please, take the newer code to work with it and when something is ready, just push a message. Working in parallel is not a good idea.
Hello Emmanuel
Upgraded to 3.9.0
Kiwi bridge don't work with my real Aether. no audio and zoom issues.
Your kiwi bridge is ehanced so i've take it as base to make a new one.
Audio OK
Smeter OK
Zoom in Aether Ok
Ehanced waterfall display in Aether
Results are similar to a true Kiwi and after 2 or three days of test i will announce Phantom link to my friends on the Aether group.
Put the new bridge_kiwi.sh in SRC/
Stop server
Recompile and restart ! :D
73's
Quote from: F1NSK on Sep 01, 2026, 01:37 PMUpgraded to 3.9.0
Kiwi bridge don't work with my real Aether. no audio and zoom issues.
I don't understand Eric. The kiwi_bridge.h file of the repo does not work with your Aether? And you've made a new one?
Yes Sir !! :D :D
Based on your 3.9.0 kiwi_bridge.
OK, Eric. Please try this file. It is a mixed between your and the repo, made just now by Claude and already tested in my instance.
It is very strange that the file of the repo does not work for you. It is working to all sysops that they have installed it, and checked with AetherSDR.
P.S. Please come to this viber group for Sysops of PhantomSDR. We can change direct messages and it is easier to solve these problems.
Forum is very good, but there is a delay between questions and answers.
You can write in French - translator do the rest. Darko for example writes in Croatian. 8)
Just tuned in your websdr via AetherSDR. No sound at all.
Please check the .toml file you use. you must add these lines at the end:
[kiwi_emulation]
enabled = true
audio_gain = 60.0 # dB, Kiwi clients only. 0 = untouched.
wf_cal = 0.0 # dB, display taste. 0 = agrees with the S-meter.
wf_fps_max = 23 # frames/s. 23 is the protocol maximum.
# smeter_offset = 5.0 # dB. Defaults to input.analog_smeter_offset.
My live phantom is on "stock" 3.9.0.
I will correct tonight at Home
v.3.9.0 to work with Audio needs these in the used .toml file:
[kiwi_emulation]
enabled = true
audio_gain = 60.0 # dB, Kiwi clients only. 0 = untouched.
wf_cal = 0.0 # dB, display taste. 0 = agrees with the S-meter.
wf_fps_max = 23 # frames/s. 23 is the protocol maximum.
# smeter_offset = 5.0 # dB. Defaults to input.analog_smeter_offset.
everybody else using these settings (in v.3.9.0) HAS Audio!
It is written in the instructions and in the demo .toml files in the repo....
Simplified GUI ! :D :D