New in v.4.1.0- QRG Sync on the receiver page. A new QRG Sync button beside IF Filters lets the page follow your own transceiver by itself, with no desktop application: the browser talks straight to the TCI server of ExpertSDR, AetherSDR or Thetis on your computer. Frequency, mode and filter width follow in both directions — turn the rig's dial or press its FIL button and the receiver follows, click the waterfall or pick an IF filter and the rig follows — and the page falls silent while you transmit. On an Icom IC-7300 the IF filters select FIL1, FIL2 and FIL3 without ever changing the widths set on the radio. Rigs without TCI — the IC-7300 and most other CAT rigs Hamlib supports — work through a small bridge, tci-bridge/tci-rigctld.mjs, run next to the radio. Tested on an IC-7300. Full section, in all seven languages and in the offline PDFs: docs/RIG_CONTROL.md under QRG Sync on the receiver page.
- Transceiver control from the desktop app. Desktop PhantomSDR+ 4.0 adds a Rig menu that keeps your own transceiver and a receiver window in step — frequency, mode and filter width, in either direction or both — and can mute the receiver while you transmit. Besides PhantomSDR-Plus it drives KiwiSDR, PA3FWM WebSDR and UberSDR receivers. It talks to Icom, Yaesu, Kenwood, Elecraft, FlexRadio and QRP Labs rigs directly, to every other rig through Hamlib, and to flrig. The receiver page gained the matching filter and mute functions in its CATsync API. Full manual, in all seven languages and in the offline PDFs: docs/RIG_CONTROL.md.
- The CATsync Tool now hears back from the receiver. A waterfall click, a passband drag or a mode change reaches the rig in the tool's PA3FWM WebSDR mode, because the page reports its real frequency and mode the way a KiwiSDR does.
- A 💾 Desktop applications button under Open Additional Info, beside System Resources, opens the download folder of Desktop PhantomSDR+ - https://www.dropbox.com/scl/fo/kjwj96zg3kj7dgq4fjef9/APnA3c9hhv4hk3YMGIGjH7s?rlkey=jfiwklly63kv73poalx631pk3&st=m37uvaym&e=1&dl=0
). The popup button row (VFO, Modes, Bands, IF Filters, QRG Sync) now has plain labels of one size. - Admin panel fixes. Clear Logs no longer fails with Permission denied on admin.log and proxy.log when the panel runs as systemd units, and the admin unit written by setup_admin.sh carries KillMode=process, so restarting the panel no longer takes the receiver off the air.
The archive of all older instances of PhantomSDR+ is also updated with the newer versions.
You can download them here: https://github.com/sv1btl/PhantomSDR-Plus_Archive (https://github.com/sv1btl/PhantomSDR-Plus_Archive)
Security and Vulnerability issues have been fixed.
Please read documentation and follow the instructions.
This is a VERY IMPORTANT update!!!
Please download ALL the files marked as "Vulnerability & security fixes in v. 4.1.0" and then run setup-firewall.sh (make it executable first) and restart Admin Panel - sudo systemctl restart phantomsdr-admin
Please update the files (just download, replace and recompile frontend only):
- frontend/src/remoteSource.js
- frontend/src/webSdrSource.js
- frontend/src/kiwiSource.js
- frontend/src/uberSource.js
Fix connection problems (specially from localhost) with some SDR's.